Ivo build that I have in the mock-up (white glue) stage. I have replaced the kit?s rear tires with tires from the Johan F/C kits that I casted in resin. I also used the wheels from the Johan kit that I have drilled to accept lug nuts (Pro Tech Hex Fittings) and studs (.025 Evergreen rod), I have a how-to on my site on doing this, check it out! This kit needs a little work to get all the body panels to fit just right but time well spent in the end. I also cut the upper body panel in two just behind the engine so upper panels can be lifted off lower body panels to show frame, fuel tank details etc. I will post again as soon as I get the real building going and yes it will be stuffed with plenty of Pro Tech goodies! keep tuned!
Charlie
Pro Tech
Source: http://cs.scaleautomag.com/scacs/forums/thread/925691.aspx
Rene Arnoux Peter Arundell Alberto Ascari Peter Ashdown Ian Ashley
No comments:
Post a Comment